One Minute: Bezel stone earrings

What you will need:

• 2 earring hooks
• 2 matching, pre-bezeled stones from an arts & crafts supply store.
• optional - jump rings (to create more space)
• pliers

Turquoise earrings:
With the pliers slightly open the bottom of the earring enough to slide on the bezeled stone.  Use pliers to close the bottom of the earring.

White and grey earrings:
With the pliers, open a jump ring and connect one grey bezeled stone to one white bezeled stone.  Then close the jump ring tightly.
Using the pliers again, open the bottom of the earring enough to slide on the top of the grey bezeled stone.  Close the bottom of the earring with the pliers.

Summertime bracelets

I am not normally a wearer of bracelets, but when I found this diy, I loved the bright, summery colors used in the bracelets.

So, I made myself two: one with silver fixtures and light blue and coral string.  And the other with gold fixtures and orange and pink string.  What's additionally fun about this diy is the color options are endless!

My two DIY summertime bracelets

Learn how to make for yourself, here.

In Pursuit of Suede String & Tassels

As you can see by what I post on this blog, I've recently been making jewelry with tassels.

When I found this picture of suede tassel earrings, the colors appealed to me: thin turquoise suede, ruby red beads and gold fixtures.

Anthropologie faceted fringe drops

As I tried to find materials to make these earrings, I found that the thinness of the suede is a large part of the effect these earrings hold.

So, my first move was to try to cut my thicker strings of suede in half.

I first used an X-Acto knife.. it was very difficult to cut evenly through the suede string with it.

Then I tried using sewing scissor, the sharpest scissors I could imagine.  With much fear for my fingers, I was able to cut the suede string thinner.

...But then the suede string fell apart.

Rather than waste more of the suede string, I just went to the art supplies store and bought thinner suede string.  AND, I also got some thin leather cord - and made two pairs of earrings!

My DIY Earrings.

What you need:

- The thinnest suede or leather cord you can find.

- Very thin wire.

- 2 of the same glass bead.

- 2 head pins with rounded top.

- A pair of earring hooks.

- Round-nose pliers and a wire cutter.

What to do:

1. Place each bead on a separate head pin.

2. Use the round nose pliers to close the head pin into a loop.  Make the loop a bit larger than normal - the suede string needs to go through it.

(The loop you made is pointing downwards)

3. With pliers, add an earring hook to the top of each head pin.

4. Determine the desired length of the tassels for your earrings.  The black pair above are about an inch and a half.  For the tan pair, they are over two inches.

5. Double the length you decide on and cut 3 to 4 pieces.

6. Fold the cut pieces in half and put one end through the loop at the bottom of the bead.

7. Start slowly and tightly wrapping the thin wire around the top of the folded suede.

8. Once you wrap the wire to desired thickness around the suede, cut with the wire cutters, and fold the raw edge in with the pliers.

9. Trim the ends so they are even.

That's all!

Chain of Change

Life is in serious transition mode now.. In all of this change occurring, I am trying to keep in mind the adage,

"Every end is a new beginning."

After a year, I've decided to postpone my return to America and continue living abroad.

Though there are so many changes now, what hasn't changed is my continued search for inspiration and love for DIY :)

I made this jump-ring chain necklace a while ago now and am still waiting for the perfect opportunity to don it.

MariaFrancescaPepe Tubular Chain Bracelet

The inspiration came from a picture I found on Pinterest (of course!) of a MariaFrancescaPepe bracelet.

After studying the picture for awhile to deduce how the jump rings were attached to each other, I set to work.

At its most basic form, all you really need to make this is A LOT of jump rings, pliers (or two pairs to save your fingers!), and a clasp... and patience.

How To:

(I made these pictures in hopes of making the instructions as understandable as possible!)

1. Open a smaller jump ring (or a chain of them or a paper clip) and slide on two jump rings.

2. Open and add two jump rings perpendicularly to the first two grey jump rings.

3. Push the blue jump rings back (so that they are parallel with the smaller jump ring). 

4. Slide the grey jump rings open so they make a 'V' and have the blue jump rings come forward.  Open two more jump rings and attach them to the blue jump rings.

5. Add two more jump rings perpendicular to the green jump rings you just added.  This is the same thing you did in step 2.

6. Push the purple jump rings back (so they are parallel with the blue jump rings.  Again, this is the same as step 3).

7. Slide the green jump rings open so they make a 'V' and have the purple jump rings come forward.

8. Open two more jump rings and attach them to the purple jump rings.

Pretend these two new jump rings are the green jump rings in step 5 and that you now need to add purple jump rings and then light grey jump rings. 

Keep repeating steps 5-8 until you get to your desired length.  Add a smaller jump ring to the end and a clasp.

A beautiful jump ring chain made (hopefully!) easy!

I decided to make a necklace instead of a bracelet - thoughts?

Tri-Color Tassels

Some more tassel earrings! Hurray!

These are super simple DIY earrings made from string and 3 colors of seed beads.

my DIY earrings

What you need:
-2 earring hooks
-2 bead tips
-nylon string (preferably in the color of the lowest color bead, in this case, brown)
-3 colors of seed beads (or more if you'd like).
-needle
-scissors
-pliers

First, cut 10 pieces of nylon string, about 4 to 5 inches each, depending on how long you want the tassle.
Then, string one bead of the last color onto one end of a cut nylon string.  Pull bead to middle and fold in half.
After folding the string in half, you can put a the two string-ends through a needle to make your life easier.  String all the following beads onto the needle so the first bead is stuck at the bottom (and no knot is needed at end to keep the beads on!).
Put as many beads of each color as you like.  Lots of freedom here!
Leave yourself plenty of room at the top.
Make 10 of these beaded strings.
With 5 beaded strings, slip the remaining string through the bead tip.  Knot the tops of the strings well so they cannot slip through the bead tip.  Cut the excess string.  Use the pliers to close the bead tip.
Repeat with the second set of 5 strings.
Use the pliers to open the bottoms of the earring hooks and slip on the bead tips.  Use pliers to close earring hooks.
All done!                   
                                          Wearing my DIY creation:

The most time consuming part of this DIY is definitely stringing all of the seed beads!

Pearl, Gold, Hoops. And time at home.

My DIY Hoops

I made the long trip home for the recent holiday break.  I've been loving living abroad, but I was missing my sisters, Mom's home-cooked meals, American clothing stores, and of course, my jewelry-making supplies.

I spent a lot of time in A.C. Moore and even more time planning what to make and then making it.

Inspiration: Earrings from here.

Perusing Pinterest, (as I spend many of my hours), I found these gorgeous earrings being sold on an Etsy site.

While I do not have the blue opal gemstone or the pearls as used by the creator of these earrings, I did find some teardrop shaped glass beads and fake pearls

So here's what you need to make your own pair:
- 2 earring hoops
- 24 small pearl beads
- 2 teardrop shaped beads
- 26 head pins
- pliers and wire cutters

3 Easy Steps
1.  Put the each pearl bead and teardrop bead on its own head pin.  Close the head pin with round-nose pliers and cut off any excess wire with the wire cutters.
2.  Slide 6 pearl beads on head pins onto the hoop, add one teardrop bead, and then another six pearl  beads.  Repeat for the other earring.
3.  Use the pliers to turn up the end of the hoops to close.  All done!

Here are my earrings:

Inspiration: Metalwork

Seeing a lot of jewelry with amazing metal work - I want to start making some of my own.

So, I've been researching how to bezel. And I'm dying to try it out.

Time to buy a blowtorch!

Yet realistically, it will probably need to wait.
(And I should also take a class on it before playing with fire!).
Until then here's some of my metal work inspiration:

All of these images are pinned to my Jewelry Inspiration & DIY Board.  

Check it out here!

Chain, Overlap, Chain.

One of my favorite necklaces on my jewelry tree is a chain and ribbon necklace I got super on-sale from Harrods during my time studying abroad in London.  The necklace is composed of overlapping thick gold chains and a black ribbon to hold it around my neck.

Necklace from 'Bella Shay Fine Fashion Jewelry and Accessories'

I came across the necklace above on Pinterest a few months ago.  It reminded me of the overlapping chains in my Harrod's necklace, but instead with two colors of thin chains, and no ribbon.

Then, over the summer, I found this black chain and this black with gold tint chain for just a few dollars each. 

And proceeded to make my own version of this necklace!

My DIY!

1. I first measured out a piece of black chain to the desired length of the necklace.

2. I cut equal pieces of black chain and gold tinted chain.  The black chain I cut again, in half.  I then attached the three pieces of chain together: black chain --> gold tinted chain --> black chain.

Make 10 of these.

3. I attached the first chain to the left-most spot I wanted, to the middle of the necklace.

4. Repeat this step, but with each new attaching chain, affix the beginning of the chain to every other link in the necklace, and then the end of the chain to every other link after the middle.

In time for a Photoshoot

On a recent trip, I had a few different special occasions to attend.  The first occasion was a photo shoot with the entire family - we haven't done one of these in years!
Once I picked the outfit and coordinated the color scheme with the rest of the family, I went to look for jewelry to pair with it.  But I couldn't find anything that I liked with the outfit.

So, what else to do, but make a new pair of earrings to match!

I spotted these earrings, the 'Bombay Hoops,' in the Perfect Match book we own and have been meaning to make them for a long time.  This was the perfect occasion.

The gold with the black beads was a good match for my coral and black outfit.  And since it hardly took any time to make, I made a second pair of gold with gold translucent beads for my mom!

It was really simple- all you need are:
- a pair of hoops (you can make your own if you want!)
- a thin wire in the same color as the hoops (24 or 26 gauge)
- 14 glass beads (7 for each earring)
- pliers
- wire cutters

First, cut a piece of thin wire, about 14 inches long.  Fold one end over the hoop and use the pliers to wrap it around the hoop tightly.  I wrapped it 3 times here.  Put a bead onto the wire and loop it through, then loop the wire another 3 times to keep with the pattern.  Continue this process until 7 beads are on hoop, with 3 wire wraps in between.  Wrap the wire the last 3 times after the final bead.  Cut both ends with the wire cutters and use the pliers to wrap the remaining bit around the hoop.
Repeat these steps for the second earring.
This all took me around 20 minutes per pair!

Who Doesn't Like Braids?

I've seen this braided bead necklace on tons of Pinterest boards!
Of course, I had to make it!

The DIY Inspiration

The most time consuming aspect of this necklace was stringing 6 strands of beads (2 for each piece of the braid).

Supplies:

- a lot of 1 bead type

- string

- 6 crimping clasps (also called bead tips?)

- 2 jump rings

- chain

- closing clasp

-pliers

For photo instructions, check out this image.

I went to ACMoore and bought a pack of reddish coral beads for this.  I cut 6 pieces of string, and tied them 2, 2, and 2 (so three strands).  Once I beaded to the desired length, I closed the knots of each 3 strands to separate crimping clasps, on each side (so 6 clasps total). Close the crimping clasps.  Then, braid!!
Once the beads are neatly braided, I combined the 3 closing clasps on the left onto one jump ring, and the 3 clasps on the right onto a second jump ring.
Then, attach the chain to the jump rings on each side.  Open the chain at the top to put on a closing clasp.  All done!

I made a second one in white with gold chain for my mom.  But, it looked great on my sister, so we gave it to her!

Bauble Bead Necklace, Part II

My first post on this blog shared a pink beaded cluster chain necklace I made, inspired by this necklace.  It's one of my favorite necklaces, I wear it all the time!
My mom, a stellar crafter - (I always ask her advice when I make things!), asked me to make one for her also!

I made this one with gold chain instead of silver.  Rather than pink beads again, I used purple and gold beads, on gold head pins, with a gold spacer bead at the base.  I thought this color scheme would look good on her olive skin tone.

For some instructions on how to make this necklace, check out this post!

 

Which color do you like better??

Chain Tassel Earrings, Part 2

Tassels have been of much inspiration to me this past spring.  While home over break from university, I made two pairs of earrings with chain tassels.

Pair 1
The first were inspired by a pair of earrings I had bought previously.  They were super easy to make and I always get compliments on these earrings when I wear them!

Supplies:
-Pair of earring hooks
-head pins with loop at bottom
-2 medium glass beads
-2 large decorative beads
-2 spacer beads
-chain (I used 3 pieces of chain per earring)
-pliers

On each head pin I put a large bead, a spacer, a glass bead, then closed the top into a loop.
For basic instructions on how to do this, look here.

I then opened the loop at the bottom of the head pin, and slid on 3 pieces of chain of equal length.  Close the loop tightly so to prevent the chains from falling off.


Add earring hooks to loop above glass bead.  All done!

Pair 2
The second pair took a little bit more time, but were not much more difficult.

Supplies:
- pair of earring hooks
- 2 cylinder shaped glass beads
- 10 small glass beads in various colors & shapes
- 10 normal head pins
- 2 head pins with looped bottom
- chain (I used 5 pieces of chain for each earring)
-pliers
-wire cutters

First, take the head pins with the looped bottoms and put a cylinder shaped bead on each.
Loop the top closed.

Put each of the small glass beads on a normal head pin (1 per pin).

Place 5 pieces of equal length chain to loop under the cylinder bead.  Do this for each earring.  Close the loop tightly afterwards so the chains do not slip off.

Once the chains are in place, add 1 bead on head pin to the end of each chain.  Loop the tops of the head pins closed.  Trim off any extra head pin with wire cutters.

The only step left is to attach the earring hooks to the top loop of the earring!

Here is some inspiration for tassel earrings.  I can't wait to make more of these!

                       Chain Tassel

                 String Tassel

These are more of a variation on the basic tassel earring:

              

                  Chan Luu earrings, $75.

Hoops with beaded tassels