Summertime bracelets

I am not normally a wearer of bracelets, but when I found this diy, I loved the bright, summery colors used in the bracelets.

So, I made myself two: one with silver fixtures and light blue and coral string.  And the other with gold fixtures and orange and pink string.  What's additionally fun about this diy is the color options are endless!

My two DIY summertime bracelets

Learn how to make for yourself, here.

Girly pink, edgy spikes

On a recent visit home, I got to spend some much needed time with my jewelry supplies.  For months I had saved pictures of jewelry that I liked in anticipation of my reunion to my bead boxes.

A style of necklace that I started to see a lot involved at least 2 rows of chain, lots of head pins, and a repetitive pattern of beads.

Some examples:

Examples of necklaces with the 2+ chain style, from my Pinterest board.

With the second necklace in mind especially, I selected the beads and chains I liked best for my DIY necklace.

My DIY Necklace

What you need:
- A chain with small links
- 14 flat headed head pins in the same color as the chain.
- 4 different types of beads in increasing sizes, 14 of each.
- Spikes or other elongating bead (tear drop, leaf shape, etc), 14 of each.
- Round-nose pliers and wire cutters.
- Clasp and jump rings

Directions:
1. First, measure out the chain required for each row of the necklace.  I had 14 columns of beads, and I put a space of 3 chain links in between each column.  Therefore, my 3 rows of chains were each 53 links in length.
2. Next, slide one of the smallest beads onto the head pin.
3. Put the head pin with the bead through the first link of the first row.
4. Add the next bead of incremental size onto the head pin and put the head pin through the first link of the second row.
5. Add the 2nd largest bead onto the head pin and put the head pin through the first link of the third row.
6. Add the largest bead onto the bead pin and use the round-nose pliers to close the pin.
7. Add the spiked bead to the end of the closed pin with a jump ring.

Repeat steps 2-7.  For this necklace I did steps 2-7 fourteen times and with 3 links in between each head pin / column.

8. Once the bulk of the necklace has been assembled, add a chain to each end of the top row.  Attach a clasp and jump rings to the end of the chain you just added.

All done!

I made my necklace with light pink, turquoise blue and silver beads, and silver spiked beads.  I like the girly, yet edgy feel of the necklace.  Unlike most DIY creations made from pictures, this necklace sits very well on. And I love finding different outfits to pair it with!

Braced with Chain and String

Can't believe it's been over a month since I was home.  And can't believe it's taken me this long to write up another blog post!  Life here is busy to say the least.

Before I went home, I had been seeing these bracelets at fancy stores all over the place.. selling for at least $25 each.  Recognizing that they are just chain, suede string, and some connecting pieces, I of course exclaimed, "wait, I can make this!".

I had been unable to find chain that was thick enough for the purpose of these bracelets at my local craft store.  I therefore waited until my trip to America to really scour the craft stores for the right materials for this project.

The bracelet took under 30 minutes to make; I ended up making a bunch of them!

Here's what you need:
- 2 pieces of chain (about 8-10 inches, depending on your wrist).
- Suede string, 2.5 times the length of your chain.
- lobster clasp and jump rings
- craft glue
- pliers
- scissors

What to do:
1. Using a jump ring, attach the first links of the two chains together.
2. Lay the chains down so that they are flat and the links line up to one another.
3. Start weaving the suede string between the links (in, over, under).
4. Once you've weaved through a few links, glue the tail of the suede string to itself.  (Do this on the side of the bracelet that will face your wrist, so that it will not be seen when you wear it.)
5. Continue weaving the suede string the same way between the links of the two chains.
6. At the end, once again connect the last two links with a jump ring.  Again, glue the suede string to itself on the side facing your wrist.
7. Cut any extra suede string from either side, once the glue has dried.
8. Open one of the jump rings on one end and add a lobster clasp.  Close the jump ring.
9. On the other end, attach as many extra jump rings as necessary to allow ease of putting on the bracelet!

With buying most of the supplies in bulk packs from the craft store, the bracelets ended up only costing a few dollars each!

I ended up keeping one for myself and giving the rest as gifts.  Everyone loved them!

The First Post in a New Place: Suede Tassle Earrings

I'm back!

After 3 months settling into this new place, I have returned to my crafting ways.

With a holiday gift exchange tomorrow - it gave me the perfect excuse to visit the local craft store.  Of course, I bought much more than needed in anticipation of other crafting projects!

I found suede string in a multitude of colors, and for a little less than fifty cents a piece.  Most things are more expensive here; it is always exciting when I come across cheap finds.  So, I bought a bunch of strings, a variety of other trinkets (clasps, earring hooks, elastic, jump rings,...), and set to work.

Materials:

- suede string (cut into 12 pieces, about 2 inches each)

- 2 cylinder cones

- 2 Earring loops

- Industrial strength glue

- pliers

- scissors

Once the suede string is cut into 12 pieces, separate 6 and 6 for each earring.

Gather the bunch of 6 pieces.  Squeeze the glue into one cylinder cone.  Then, push the bunch of suede string into the cylinder cone.  Repeat for the second earring.  Let them sit for a few minutes.

Use the pliers to attach the earring loops to the top of the cylinder cones.

Trim the ends of the suede so they are all the same length.

That's all!

I ended up making 2 pairs - now which color do I keep and which do I give?!

Chain Tassel Earrings, Part 2

Tassels have been of much inspiration to me this past spring.  While home over break from university, I made two pairs of earrings with chain tassels.

Pair 1
The first were inspired by a pair of earrings I had bought previously.  They were super easy to make and I always get compliments on these earrings when I wear them!

Supplies:
-Pair of earring hooks
-head pins with loop at bottom
-2 medium glass beads
-2 large decorative beads
-2 spacer beads
-chain (I used 3 pieces of chain per earring)
-pliers

On each head pin I put a large bead, a spacer, a glass bead, then closed the top into a loop.
For basic instructions on how to do this, look here.

I then opened the loop at the bottom of the head pin, and slid on 3 pieces of chain of equal length.  Close the loop tightly so to prevent the chains from falling off.


Add earring hooks to loop above glass bead.  All done!

Pair 2
The second pair took a little bit more time, but were not much more difficult.

Supplies:
- pair of earring hooks
- 2 cylinder shaped glass beads
- 10 small glass beads in various colors & shapes
- 10 normal head pins
- 2 head pins with looped bottom
- chain (I used 5 pieces of chain for each earring)
-pliers
-wire cutters

First, take the head pins with the looped bottoms and put a cylinder shaped bead on each.
Loop the top closed.

Put each of the small glass beads on a normal head pin (1 per pin).

Place 5 pieces of equal length chain to loop under the cylinder bead.  Do this for each earring.  Close the loop tightly afterwards so the chains do not slip off.

Once the chains are in place, add 1 bead on head pin to the end of each chain.  Loop the tops of the head pins closed.  Trim off any extra head pin with wire cutters.

The only step left is to attach the earring hooks to the top loop of the earring!

Here is some inspiration for tassel earrings.  I can't wait to make more of these!

                       Chain Tassel

                 String Tassel

These are more of a variation on the basic tassel earring:

              

                  Chan Luu earrings, $75.

Hoops with beaded tassels

Pink Bauble Bead Necklace

I have always been more of an earrings-girl, but necklaces have been on top of my DIY list this summer!
While browsing through the Old Navy site, I came across this necklace:

Old Navy Pink Beaded Cluster Chain Necklace

And I thought, "Wait, I can make that!"

What you need:
- 2 pieces of chain
          one with medium links (about 4 inches)
          one with small links (to go around neck)
- 30+ headpins
- 30+ glass beads in various colors within one color scheme
- end clasp and jump rings
- round-nose pliers and needle nose pliers
- wire cutters

Take the chain with medium sized links and start adding headpins with beads.
For a tutorial on how to put beads on headpins, reference this DIY on Flamingo Toes
Here are a few pictures from Flamingo Toes:

Add bead to head pin, hold pin in round nose pliers, wrap wire around pliers to create a loop.

For this necklace, do not cut the remaining head pin yet! The extra wire makes it easier to place the bead on the chain once the cluster gets busy.

Add anywhere from 3 to 5 beads per link on the chain, depending on the size of the beads and the clustering desired.
Once the wire is filled with beads, attach the smaller chain to each end of the medium chain to form a circle.
Estimate where the small chain will hit the back of your neck and if possible, open the chain, or cut a link with the wire cutters.  On one end of the chain, attach a clasp.  On the other end, attach as many jump rings as desired (to alternate the length of the necklace).
Now, use the wire cutters to cut off as much of the remaining head pins as possible.  All done!

Made it myself!