Summertime bracelets

I am not normally a wearer of bracelets, but when I found this diy, I loved the bright, summery colors used in the bracelets.

So, I made myself two: one with silver fixtures and light blue and coral string.  And the other with gold fixtures and orange and pink string.  What's additionally fun about this diy is the color options are endless!

My two DIY summertime bracelets

Learn how to make for yourself, here.

Girly pink, edgy spikes

On a recent visit home, I got to spend some much needed time with my jewelry supplies.  For months I had saved pictures of jewelry that I liked in anticipation of my reunion to my bead boxes.

A style of necklace that I started to see a lot involved at least 2 rows of chain, lots of head pins, and a repetitive pattern of beads.

Some examples:

Examples of necklaces with the 2+ chain style, from my Pinterest board.

With the second necklace in mind especially, I selected the beads and chains I liked best for my DIY necklace.

My DIY Necklace

What you need:
- A chain with small links
- 14 flat headed head pins in the same color as the chain.
- 4 different types of beads in increasing sizes, 14 of each.
- Spikes or other elongating bead (tear drop, leaf shape, etc), 14 of each.
- Round-nose pliers and wire cutters.
- Clasp and jump rings

Directions:
1. First, measure out the chain required for each row of the necklace.  I had 14 columns of beads, and I put a space of 3 chain links in between each column.  Therefore, my 3 rows of chains were each 53 links in length.
2. Next, slide one of the smallest beads onto the head pin.
3. Put the head pin with the bead through the first link of the first row.
4. Add the next bead of incremental size onto the head pin and put the head pin through the first link of the second row.
5. Add the 2nd largest bead onto the head pin and put the head pin through the first link of the third row.
6. Add the largest bead onto the bead pin and use the round-nose pliers to close the pin.
7. Add the spiked bead to the end of the closed pin with a jump ring.

Repeat steps 2-7.  For this necklace I did steps 2-7 fourteen times and with 3 links in between each head pin / column.

8. Once the bulk of the necklace has been assembled, add a chain to each end of the top row.  Attach a clasp and jump rings to the end of the chain you just added.

All done!

I made my necklace with light pink, turquoise blue and silver beads, and silver spiked beads.  I like the girly, yet edgy feel of the necklace.  Unlike most DIY creations made from pictures, this necklace sits very well on. And I love finding different outfits to pair it with!

Inspiration: Metalwork

Seeing a lot of jewelry with amazing metal work - I want to start making some of my own.

So, I've been researching how to bezel. And I'm dying to try it out.

Time to buy a blowtorch!

Yet realistically, it will probably need to wait.
(And I should also take a class on it before playing with fire!).
Until then here's some of my metal work inspiration:

All of these images are pinned to my Jewelry Inspiration & DIY Board.  

Check it out here!

From Hemp to Suede...

In continuation of my crafting with suede string, I made this bracelet over the weekend:

When I showed my friends the bracelet, most were immediately reminded of the hemp bracelets popular at summer camps.

There's a reason for this recollection... it's the same stitch!  I believe it is called the square knot..

Materials:

- 4 pieces suede string (2 long and 2 bracelet length)

- 2 end closing pieces

- 32 jump rings, plus a few extra for bracelet closure

- clasp

- pliers

The Square Knot Stitch

Enclose the 4 pieces of string in one of the closing pieces.  Use pliers to tightly close the end piece around the 4 strings.

Begin the square knot (as shown in picture above).  I did 12 or so square knots before I started adding the rings, and the bracelet is a little large on me, but I also have slim wrists.

Add 1 ring to each outer string, and tie the knot.  Tie a second knot after that.  For the third knot, put the strings back through the rings and add another ring on top.  Tie a knot.  Repeat the steps.  I used 16 rings on each side (a total of 32).

After, do the same amount of knots that the bracelet started with, before the rings were added.

Close off the end with another end piece and pliers - make sure it is very tight.  Add the additional rings and the clasp.  

        

I'm thinking of making this with gold fixtures next.. and maybe black suede?

In honor of the Olympics...

Rings necklaces have been all over Pinterest this summer!  The multiple rings linked together, sometimes in various sizes, remind me of the 5 overlapping Olympic rings.  Incidentally, I've been crafting lots while watching the Olympics.

Here are a few of the necklaces I have spotted:
                  

I found some large silver rings at home and the small pieces to attach the rings together.  Technically, the rings could also be attached using very small jump rings. 

I set up the rings in the pattern I wanted for the necklace.  Carefully, I attached the rings to each other.

While abroad, I bought a bundle of suede strings in a bunch of colors for dirt cheap!  I used the taupe/grey colored suede string to turn the linked together rings into a necklace.  I looped the suede string through a few of the smaller rings and then using the same small attaching pieces to connect it to the top of the larger rings.  Ta da! My very own ring necklace!

Better pictures to come soon!