Braced with Chain and String

Can't believe it's been over a month since I was home.  And can't believe it's taken me this long to write up another blog post!  Life here is busy to say the least.

Before I went home, I had been seeing these bracelets at fancy stores all over the place.. selling for at least $25 each.  Recognizing that they are just chain, suede string, and some connecting pieces, I of course exclaimed, "wait, I can make this!".

I had been unable to find chain that was thick enough for the purpose of these bracelets at my local craft store.  I therefore waited until my trip to America to really scour the craft stores for the right materials for this project.

The bracelet took under 30 minutes to make; I ended up making a bunch of them!

Here's what you need:
- 2 pieces of chain (about 8-10 inches, depending on your wrist).
- Suede string, 2.5 times the length of your chain.
- lobster clasp and jump rings
- craft glue
- pliers
- scissors

What to do:
1. Using a jump ring, attach the first links of the two chains together.
2. Lay the chains down so that they are flat and the links line up to one another.
3. Start weaving the suede string between the links (in, over, under).
4. Once you've weaved through a few links, glue the tail of the suede string to itself.  (Do this on the side of the bracelet that will face your wrist, so that it will not be seen when you wear it.)
5. Continue weaving the suede string the same way between the links of the two chains.
6. At the end, once again connect the last two links with a jump ring.  Again, glue the suede string to itself on the side facing your wrist.
7. Cut any extra suede string from either side, once the glue has dried.
8. Open one of the jump rings on one end and add a lobster clasp.  Close the jump ring.
9. On the other end, attach as many extra jump rings as necessary to allow ease of putting on the bracelet!

With buying most of the supplies in bulk packs from the craft store, the bracelets ended up only costing a few dollars each!

I ended up keeping one for myself and giving the rest as gifts.  Everyone loved them!

Bauble Bead Necklace, Part II

My first post on this blog shared a pink beaded cluster chain necklace I made, inspired by this necklace.  It's one of my favorite necklaces, I wear it all the time!
My mom, a stellar crafter - (I always ask her advice when I make things!), asked me to make one for her also!

I made this one with gold chain instead of silver.  Rather than pink beads again, I used purple and gold beads, on gold head pins, with a gold spacer bead at the base.  I thought this color scheme would look good on her olive skin tone.

For some instructions on how to make this necklace, check out this post!

 

Which color do you like better??

Chain Tassel Earrings, Part 2

Tassels have been of much inspiration to me this past spring.  While home over break from university, I made two pairs of earrings with chain tassels.

Pair 1
The first were inspired by a pair of earrings I had bought previously.  They were super easy to make and I always get compliments on these earrings when I wear them!

Supplies:
-Pair of earring hooks
-head pins with loop at bottom
-2 medium glass beads
-2 large decorative beads
-2 spacer beads
-chain (I used 3 pieces of chain per earring)
-pliers

On each head pin I put a large bead, a spacer, a glass bead, then closed the top into a loop.
For basic instructions on how to do this, look here.

I then opened the loop at the bottom of the head pin, and slid on 3 pieces of chain of equal length.  Close the loop tightly so to prevent the chains from falling off.


Add earring hooks to loop above glass bead.  All done!

Pair 2
The second pair took a little bit more time, but were not much more difficult.

Supplies:
- pair of earring hooks
- 2 cylinder shaped glass beads
- 10 small glass beads in various colors & shapes
- 10 normal head pins
- 2 head pins with looped bottom
- chain (I used 5 pieces of chain for each earring)
-pliers
-wire cutters

First, take the head pins with the looped bottoms and put a cylinder shaped bead on each.
Loop the top closed.

Put each of the small glass beads on a normal head pin (1 per pin).

Place 5 pieces of equal length chain to loop under the cylinder bead.  Do this for each earring.  Close the loop tightly afterwards so the chains do not slip off.

Once the chains are in place, add 1 bead on head pin to the end of each chain.  Loop the tops of the head pins closed.  Trim off any extra head pin with wire cutters.

The only step left is to attach the earring hooks to the top loop of the earring!

Here is some inspiration for tassel earrings.  I can't wait to make more of these!

                       Chain Tassel

                 String Tassel

These are more of a variation on the basic tassel earring:

              

                  Chan Luu earrings, $75.

Hoops with beaded tassels