A variation on bombay hoops

Some of my favorite hoop earrings that I made are these, the bombay hoops.

I made a variation on them, with beads in one of my favorite colors.  Now these are my favorite hoops!:

The how to is very similar to the original bombay hoops.

What you need:

-a pair of wire hoops

-a pair of earring hooks

-a thin wire, 24 or 26 gauge (I used a fun blue wire for these).

-16 beads (8 for each earring).

-pliers

-wire cutters

First, cut a piece of thin wire, about 20 inches long.  Fold one end over the hoop and use the pliers to wrap it around the hoop tightly.

Put a bead onto the wire and loop it through, then loop the wire another 3 times, to keep with the pattern.

Continue this process until all 8 beads are on the hoop.

Be sure to wrap the wire three times after the 8th bead and use the pliers again to tighten it.

Cut the wire closely to the hoop at both ends with the wire cutters and use the pliers to wrap the remaining bit around the hoop.

Use the pliers to connect the top of the hoops.  Slightly open the bottom of each earring hook and connect one to each wire hoop.  Close the bottom of each earring hook.

And all done!

In Pursuit of Suede String & Tassels

As you can see by what I post on this blog, I've recently been making jewelry with tassels.

When I found this picture of suede tassel earrings, the colors appealed to me: thin turquoise suede, ruby red beads and gold fixtures.

Anthropologie faceted fringe drops

As I tried to find materials to make these earrings, I found that the thinness of the suede is a large part of the effect these earrings hold.

So, my first move was to try to cut my thicker strings of suede in half.

I first used an X-Acto knife.. it was very difficult to cut evenly through the suede string with it.

Then I tried using sewing scissor, the sharpest scissors I could imagine.  With much fear for my fingers, I was able to cut the suede string thinner.

...But then the suede string fell apart.

Rather than waste more of the suede string, I just went to the art supplies store and bought thinner suede string.  AND, I also got some thin leather cord - and made two pairs of earrings!

My DIY Earrings.

What you need:

- The thinnest suede or leather cord you can find.

- Very thin wire.

- 2 of the same glass bead.

- 2 head pins with rounded top.

- A pair of earring hooks.

- Round-nose pliers and a wire cutter.

What to do:

1. Place each bead on a separate head pin.

2. Use the round nose pliers to close the head pin into a loop.  Make the loop a bit larger than normal - the suede string needs to go through it.

(The loop you made is pointing downwards)

3. With pliers, add an earring hook to the top of each head pin.

4. Determine the desired length of the tassels for your earrings.  The black pair above are about an inch and a half.  For the tan pair, they are over two inches.

5. Double the length you decide on and cut 3 to 4 pieces.

6. Fold the cut pieces in half and put one end through the loop at the bottom of the bead.

7. Start slowly and tightly wrapping the thin wire around the top of the folded suede.

8. Once you wrap the wire to desired thickness around the suede, cut with the wire cutters, and fold the raw edge in with the pliers.

9. Trim the ends so they are even.

That's all!

In time for a Photoshoot

On a recent trip, I had a few different special occasions to attend.  The first occasion was a photo shoot with the entire family - we haven't done one of these in years!
Once I picked the outfit and coordinated the color scheme with the rest of the family, I went to look for jewelry to pair with it.  But I couldn't find anything that I liked with the outfit.

So, what else to do, but make a new pair of earrings to match!

I spotted these earrings, the 'Bombay Hoops,' in the Perfect Match book we own and have been meaning to make them for a long time.  This was the perfect occasion.

The gold with the black beads was a good match for my coral and black outfit.  And since it hardly took any time to make, I made a second pair of gold with gold translucent beads for my mom!

It was really simple- all you need are:
- a pair of hoops (you can make your own if you want!)
- a thin wire in the same color as the hoops (24 or 26 gauge)
- 14 glass beads (7 for each earring)
- pliers
- wire cutters

First, cut a piece of thin wire, about 14 inches long.  Fold one end over the hoop and use the pliers to wrap it around the hoop tightly.  I wrapped it 3 times here.  Put a bead onto the wire and loop it through, then loop the wire another 3 times to keep with the pattern.  Continue this process until 7 beads are on hoop, with 3 wire wraps in between.  Wrap the wire the last 3 times after the final bead.  Cut both ends with the wire cutters and use the pliers to wrap the remaining bit around the hoop.
Repeat these steps for the second earring.
This all took me around 20 minutes per pair!