Tri-Color Tassels

Some more tassel earrings! Hurray!

These are super simple DIY earrings made from string and 3 colors of seed beads.

my DIY earrings

What you need:
-2 earring hooks
-2 bead tips
-nylon string (preferably in the color of the lowest color bead, in this case, brown)
-3 colors of seed beads (or more if you'd like).
-needle
-scissors
-pliers

First, cut 10 pieces of nylon string, about 4 to 5 inches each, depending on how long you want the tassle.
Then, string one bead of the last color onto one end of a cut nylon string.  Pull bead to middle and fold in half.
After folding the string in half, you can put a the two string-ends through a needle to make your life easier.  String all the following beads onto the needle so the first bead is stuck at the bottom (and no knot is needed at end to keep the beads on!).
Put as many beads of each color as you like.  Lots of freedom here!
Leave yourself plenty of room at the top.
Make 10 of these beaded strings.
With 5 beaded strings, slip the remaining string through the bead tip.  Knot the tops of the strings well so they cannot slip through the bead tip.  Cut the excess string.  Use the pliers to close the bead tip.
Repeat with the second set of 5 strings.
Use the pliers to open the bottoms of the earring hooks and slip on the bead tips.  Use pliers to close earring hooks.
All done!                   
                                          Wearing my DIY creation:

The most time consuming part of this DIY is definitely stringing all of the seed beads!

Braced with Chain and String

Can't believe it's been over a month since I was home.  And can't believe it's taken me this long to write up another blog post!  Life here is busy to say the least.

Before I went home, I had been seeing these bracelets at fancy stores all over the place.. selling for at least $25 each.  Recognizing that they are just chain, suede string, and some connecting pieces, I of course exclaimed, "wait, I can make this!".

I had been unable to find chain that was thick enough for the purpose of these bracelets at my local craft store.  I therefore waited until my trip to America to really scour the craft stores for the right materials for this project.

The bracelet took under 30 minutes to make; I ended up making a bunch of them!

Here's what you need:
- 2 pieces of chain (about 8-10 inches, depending on your wrist).
- Suede string, 2.5 times the length of your chain.
- lobster clasp and jump rings
- craft glue
- pliers
- scissors

What to do:
1. Using a jump ring, attach the first links of the two chains together.
2. Lay the chains down so that they are flat and the links line up to one another.
3. Start weaving the suede string between the links (in, over, under).
4. Once you've weaved through a few links, glue the tail of the suede string to itself.  (Do this on the side of the bracelet that will face your wrist, so that it will not be seen when you wear it.)
5. Continue weaving the suede string the same way between the links of the two chains.
6. At the end, once again connect the last two links with a jump ring.  Again, glue the suede string to itself on the side facing your wrist.
7. Cut any extra suede string from either side, once the glue has dried.
8. Open one of the jump rings on one end and add a lobster clasp.  Close the jump ring.
9. On the other end, attach as many extra jump rings as necessary to allow ease of putting on the bracelet!

With buying most of the supplies in bulk packs from the craft store, the bracelets ended up only costing a few dollars each!

I ended up keeping one for myself and giving the rest as gifts.  Everyone loved them!

Pearl, Gold, Hoops. And time at home.

My DIY Hoops

I made the long trip home for the recent holiday break.  I've been loving living abroad, but I was missing my sisters, Mom's home-cooked meals, American clothing stores, and of course, my jewelry-making supplies.

I spent a lot of time in A.C. Moore and even more time planning what to make and then making it.

Inspiration: Earrings from here.

Perusing Pinterest, (as I spend many of my hours), I found these gorgeous earrings being sold on an Etsy site.

While I do not have the blue opal gemstone or the pearls as used by the creator of these earrings, I did find some teardrop shaped glass beads and fake pearls

So here's what you need to make your own pair:
- 2 earring hoops
- 24 small pearl beads
- 2 teardrop shaped beads
- 26 head pins
- pliers and wire cutters

3 Easy Steps
1.  Put the each pearl bead and teardrop bead on its own head pin.  Close the head pin with round-nose pliers and cut off any excess wire with the wire cutters.
2.  Slide 6 pearl beads on head pins onto the hoop, add one teardrop bead, and then another six pearl  beads.  Repeat for the other earring.
3.  Use the pliers to turn up the end of the hoops to close.  All done!

Here are my earrings:

Inspiration: Metalwork

Seeing a lot of jewelry with amazing metal work - I want to start making some of my own.

So, I've been researching how to bezel. And I'm dying to try it out.

Time to buy a blowtorch!

Yet realistically, it will probably need to wait.
(And I should also take a class on it before playing with fire!).
Until then here's some of my metal work inspiration:

All of these images are pinned to my Jewelry Inspiration & DIY Board.  

Check it out here!

Chain, Overlap, Chain.

One of my favorite necklaces on my jewelry tree is a chain and ribbon necklace I got super on-sale from Harrods during my time studying abroad in London.  The necklace is composed of overlapping thick gold chains and a black ribbon to hold it around my neck.

Necklace from 'Bella Shay Fine Fashion Jewelry and Accessories'

I came across the necklace above on Pinterest a few months ago.  It reminded me of the overlapping chains in my Harrod's necklace, but instead with two colors of thin chains, and no ribbon.

Then, over the summer, I found this black chain and this black with gold tint chain for just a few dollars each. 

And proceeded to make my own version of this necklace!

My DIY!

1. I first measured out a piece of black chain to the desired length of the necklace.

2. I cut equal pieces of black chain and gold tinted chain.  The black chain I cut again, in half.  I then attached the three pieces of chain together: black chain --> gold tinted chain --> black chain.

Make 10 of these.

3. I attached the first chain to the left-most spot I wanted, to the middle of the necklace.

4. Repeat this step, but with each new attaching chain, affix the beginning of the chain to every other link in the necklace, and then the end of the chain to every other link after the middle.

From Hemp to Suede...

In continuation of my crafting with suede string, I made this bracelet over the weekend:

When I showed my friends the bracelet, most were immediately reminded of the hemp bracelets popular at summer camps.

There's a reason for this recollection... it's the same stitch!  I believe it is called the square knot..

Materials:

- 4 pieces suede string (2 long and 2 bracelet length)

- 2 end closing pieces

- 32 jump rings, plus a few extra for bracelet closure

- clasp

- pliers

The Square Knot Stitch

Enclose the 4 pieces of string in one of the closing pieces.  Use pliers to tightly close the end piece around the 4 strings.

Begin the square knot (as shown in picture above).  I did 12 or so square knots before I started adding the rings, and the bracelet is a little large on me, but I also have slim wrists.

Add 1 ring to each outer string, and tie the knot.  Tie a second knot after that.  For the third knot, put the strings back through the rings and add another ring on top.  Tie a knot.  Repeat the steps.  I used 16 rings on each side (a total of 32).

After, do the same amount of knots that the bracelet started with, before the rings were added.

Close off the end with another end piece and pliers - make sure it is very tight.  Add the additional rings and the clasp.  

        

I'm thinking of making this with gold fixtures next.. and maybe black suede?

The First Post in a New Place: Suede Tassle Earrings

I'm back!

After 3 months settling into this new place, I have returned to my crafting ways.

With a holiday gift exchange tomorrow - it gave me the perfect excuse to visit the local craft store.  Of course, I bought much more than needed in anticipation of other crafting projects!

I found suede string in a multitude of colors, and for a little less than fifty cents a piece.  Most things are more expensive here; it is always exciting when I come across cheap finds.  So, I bought a bunch of strings, a variety of other trinkets (clasps, earring hooks, elastic, jump rings,...), and set to work.

Materials:

- suede string (cut into 12 pieces, about 2 inches each)

- 2 cylinder cones

- 2 Earring loops

- Industrial strength glue

- pliers

- scissors

Once the suede string is cut into 12 pieces, separate 6 and 6 for each earring.

Gather the bunch of 6 pieces.  Squeeze the glue into one cylinder cone.  Then, push the bunch of suede string into the cylinder cone.  Repeat for the second earring.  Let them sit for a few minutes.

Use the pliers to attach the earring loops to the top of the cylinder cones.

Trim the ends of the suede so they are all the same length.

That's all!

I ended up making 2 pairs - now which color do I keep and which do I give?!